HOME
ꄲ
Smart Sensor
ꄲ
MEMS Sensor
ꄲ
MEMS Pressure Sensor
ꄲ
1500D Absolute Pressure Sensors with Waterproof
1500D Absolute Pressure Sensors with Waterproof
PN: S135
-
Overview
The S135SiP (System-in-a-Package) solution comprises of aresistive bridge type pressure sensor and an18-bit calibration math DSP for high resolution and accurate pressure measurements. The fully calibrated pressure and temperature compensated digital output makes the S135 solution simple to use.The ADC comprises of an internal calibration logic that provides accurate pressure and temperature measurements to the application via I²C interface.
There is no need to separately download internal calibration coefficients and have the host microcontroller conduct complicated compensation calculations.Applications
- Altimeters
- Portable and stationary barometers
- Diving systems
- Weather stations
- GPS applications
- Hard disk drives
- Industrial equipment
- Air control systems
- Vacuum systems
Benefits
- Water Protection up to 100m
- Gel Filled Stainless Steel Ring for Sealing
- Low Power Consumption. Excellent for Battery and Other Low-Power Applications
- External Clock not Required
Features
- Factory Calibrated Pressure and Temperature Sensor
- Supply Voltage: 1.8V to 3.6V
- Current Consumption: <5uA
- Sleep State Current: <250nA (25°C)
- Absolute Temperature Range: -40°C to +85°C
- Pressure Accuracy: <±0.2kPa (<±2.0mbar) @ 25°C
- Temperature Accuracy: ±1.0°C
- Altitude Resolution Better Than 1.0 meter (50cm) inActive Mode
Interfaces
- I²CTM* Compatible (≤3.4MHz)
Physical Characteristics
- 4.5 x 4.5 x 3.5mm (w x l x h)
- SMD, 6 Lead
- Ceramic Substrat